Descripción
10078715 COLLAR, HP, 3/8 "accesorio de chorro de agua
Piezas principales para la bomba SL-IV 50HP:
| Artículo | Producto NO. | Nombre del producto | Imagen |
| 1 | 05144647 | Cilindro HP |  |
| 2 | 05144688 | Conjunto de cabezal de sellado |  |
| 3 | 05144696 | Espaciador de cabezal de sellado |  |
| 4 | 05144712 | Camisa del cilindro |  |
| 5 | 05149703 | Conjunto de sellos |  |
| 6 | 05130091 | Cartucho hidráulico |  |
| 7 | 05119151 | Émbolo cerámico |  |
| 8 | 05116561 | Poppet HP |  |
| 9 | 05116751 | Pin de poppet |  |
| 10 | 05144670 | Retenedor de poppet |  |
Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.
Dustproofing the cutting platform of water jet cutting machines
Dust-proofing the cutting platform of a Conexión por chorro de agua water jet cutting machine is critical to ensure safety and cut quality during the cutting process. Here are some common ways to prevent dust:
Enclosed Cutting Chamber: Use an enclosed Conexión por chorro de agua cutting chamber or cutting box to isolate the cutting area from the outside environment. This method can effectively prevent the slag, dust and spatter generated during the cutting process from spreading to the surrounding environment and keep the working area clean.
Dust-absorbing equipment: Specialized dust-absorbing equipment, such as vacuum cleaners and dust-removal systems, are equipped to absorb and collect the slag and dust generated during the cutting process. These devices are usually connected to the Conexión por chorro de agua cutting machine and suck up the slag and dust directly through pipes Conexión por chorro de agua or vacuum nozzles to minimize their diffusion in the air.
Water Sprinkler Systems: Water sprinkler systems are installed around the cutting area or on the cutting platform to control the dust and slag generated during the cutting process. Water spraying reduces the suspension of dust in the cutting area and reduces its diffusion into the air. In addition, water showers can serve to cool and clean the cutting area.
Guards and baffles: Appropriate guards and baffles are installed on the cutting platform to block the splashing of slag and spatter. These guards reduce the spread of waste slag and dust and provide additional safety protection against operator injury from splashes during the cutting process.
Regular cleaning: Regularly clean the cutting platform and surrounding area to promptly remove accumulated slag and dust. This reduces the accumulation of slag and dust, reduces the risk of its re-spreading, and keeps the work area clean and safe.
When selecting and using dust control methods, suitable dust control measures should be determined based on the specific cutting machine Conexión por chorro de agua and working conditions. In addition, operators should always follow relevant safety procedures and personal protection requirements to ensure their safety and health.
Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.
El siguiente video muestra nuestro nuevo pedido de dos bombas intensificadoras SL-VI (50HP) Chorro de agua de 60000 psi En las pruebas, el embalaje se envía:
