Descripción

Water jet cutter repairs the valve body repair kit

FAQ of the water jet cutter – What is the reason for the waterjet intensifier pump switching too fast?
1. Water jet orifice chipping: The reversing of the water jet cutter is controlled by a computer. If the operation is not done properly, the reversing will be too fast. This is the most common reason. For example, if the axial movement speed is too fast, the tool head will change direction too quickly when it hits the workpiece or the guide rail.
2. Hydraulic system problems: The hydraulic system of the waterjet controls its operation. If there is a problem with the system, it will cause the waterjet to change direction too quickly. For example, poor oil quality or blocked pipelines, insufficient hydraulic pressure, may cause this situation.
3. Mechanical structure problems: The precision of the mechanical structure of the water jet cutter is very high. If there is a problem, it will cause the water jet to change direction too quickly. For example, slack springs, damaged rails, can all cause this.
4. Wrong setting of cutting parameters: The cutting parameters of the water jet are very important, if not set properly, it will cause the water jet to change direction too quickly. For example, too much pressure or too much speed can cause this condition.