Descripción
05148853 TUBO HP 3/8" BENT SLIV FD accesorio de chorro de agua
Piezas principales para la bomba SL-IV 50HP:
| Artículo | Producto NO. | Nombre del producto | Imagen |
| 1 | 05144647 | Cilindro HP |  |
| 2 | 05144688 | Conjunto de cabezal de sellado |  |
| 3 | 05144696 | Espaciador de cabezal de sellado |  |
| 4 | 05144712 | Camisa del cilindro |  |
| 5 | 05149703 | Conjunto de sellos |  |
| 6 | 05130091 | Cartucho hidráulico |  |
| 7 | 05119151 | Émbolo cerámico |  |
| 8 | 05116561 | Poppet HP |  |
| 9 | 05116751 | Pin de poppet |  |
| 10 | 05144670 | Retenedor de poppet |  |
Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.
Does an increase in the flow rate of a water jet cutting machine have an effect on the damage to the material being cut?
Yes, increased flow rates on Conexión por chorro de agua water jet cutting machines may have an effect on damage to the material being cut. While increased flow rates can improve cutting efficiency, excessive flow rates may lead to the following problems:
Excessive Impact: Increasing the flow rate of a Conexión por chorro de agua water jet increases the impact force, and if the impact force is too high, it may cause the material in the cutting area to flake, break or be damaged. Particularly with certain brittle or thin sheet materials, excessive flow rates may cause cracking or fracturing.
Increased heat-affected zone: When Conexión por chorro de agua waterjet cutting, the cooling effect of the water flow reduces the heat-affected zone, which is the area where heat causes a change in material properties. However, a flow rate that is too high may not adequately cool the cut area, resulting in an enlarged heat-affected zone where the material perimeter may become more fragile or deteriorate.
Scrap nuisance: Increasing the flow rate enhances the scouring force on the scrap and cutting residue, but if the flow rate is too high, it may result in a buildup of scrap in the cutting area or ineffective removal, thus affecting the quality of the cut.
Therefore, when selecting the flow rate of a Conexión por chorro de agua water jet cutting machine, factors such as the nature of the material to be cut, its thickness and the required cutting quality need to be considered. An appropriate flow rate can balance the relationship between cutting efficiency and material damage to obtain the best cutting results. In practice, trials and adjustments are usually required to find the right flow rate value that is best suited for a particular application.
Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.
El siguiente video muestra nuestro nuevo pedido de dos bombas intensificadoras SL-VI (50HP) Chorro de agua de 60000 psi En las pruebas, el embalaje se envía:
