Descripción
Piezas de celdas de chorro de agua para robots
Item number: 103262 Coil Axis 4,5,6 Top M98-2400/10
Detalles: utilizado en los brazos robóticos de ABB
Win-Win proporciona soluciones de chorro de agua robotizado, piezas de celdas de chorro de agua robotizadas, etc.
Related robot waterjet cutting workstation & Piezas de células de chorro de agua del robot:
Robótico Sistema de corte por chorro de agua & Piezas de celdas de chorro de agua para robots: Estación de trabajo robótica de chorro de agua Yaskawa y piezas de celda de chorro de agua robotizadas, estación de trabajo de chorro de agua robótica Dual Fanuc y piezas de celda de chorro de agua robótica, estación de trabajo robótica de chorro de agua ABB y piezas de celda de chorro de agua robótica.
FAQ of platform waterjet machine & robot waterjet system & Piezas de células de chorro de agua del robot:
Are there high water quality requirements for robotic water jet cutting machines?
Yes, robotic water jet cutting machines have certain water quality requirements. Water quality directly affects the performance and cutting results of the machine, so it is very important to use the proper water quality.
Here are some common water quality requirements and considerations:
Clean water source: The machine requires a clean water source, preferably deionized or filtered and treated water. Water containing particulate matter, impurities or chemicals may cause damage or clogging to the machine’s nozzles and other critical components.
WATER HARDNESS: Water hardness is the amount of dissolved calcium and magnesium in the water. High water hardness can lead to the formation of scale in the nozzles and pipes, which can interfere with the proper functioning of the machine. Therefore, if the water hardness is high, it is recommended to use softened water or proper water treatment.
Water pH: The pH of the water is also a factor to consider. Too low or too high a pH may cause corrosion or damage to the materials and components of the machine. Generally speaking, neutral water with a pH between 6.5 and 8.5 is suitable.
Water pressure and flow: Machines usually require a certain level of water pressure and flow to operate properly. Ensure that the water source supplies a steady water pressure and sufficient flow rate to meet the needs of the machine. Water pressure or flow rates that are too low may result in poor cutting results or the machine may not operate properly.
Please note that specific water quality requirements may vary depending on the machine model and manufacturer. It is recommended that you read the operating manual and user guide provided by the manufacturer for specific water quality requirements and follow the recommendations and instructions before using the machine.
