Descripción
05148846 TUBO Accesorio de chorro de agua HP 3/8" BENT 4150
Piezas principales para la bomba SL-IV 50HP:
| Artículo | Producto NO. | Nombre del producto | Imagen |
| 1 | 05144647 | Cilindro HP |  |
| 2 | 05144688 | Conjunto de cabezal de sellado |  |
| 3 | 05144696 | Espaciador de cabezal de sellado |  |
| 4 | 05144712 | Camisa del cilindro |  |
| 5 | 05149703 | Conjunto de sellos |  |
| 6 | 05130091 | Cartucho hidráulico |  |
| 7 | 05119151 | Émbolo cerámico |  |
| 8 | 05116561 | Poppet HP |  |
| 9 | 05116751 | Pin de poppet |  |
| 10 | 05144670 | Retenedor de poppet |  |
Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.
What are some ways to minimize noise from water jet cutting machines?
Choose high quality, high technology and high performance water jet cutting machines.
Adopt servo motor, quiet, high efficiency and energy saving.
Acoustic Enclosure: Wrap the Conexión por chorro de agua water jet cutting machine in a specially designed acoustic enclosure to isolate the noise and reduce its transmission. The acoustic enclosure should have a good seal and sound absorbing materials to minimize noise leakage.
Vibration Isolation: Use vibration isolation to isolate the Conexión por chorro de agua water jet cutting machine from surrounding structures to reduce vibration transmission and noise generation. This can be achieved by, for example, installing vibration dampening pads on the bottom of the machine or using vibration dampening feet.
Noise-absorbing materials: Use noise-absorbing materials such as acoustic panels and tiles on surfaces such as walls, ceilings or floors around the cutting machine to absorb noise and minimize its reflection, thus reducing the overall noise level. Conexión por chorro de agua
Cutting Fluid Selection: Choosing the right cutting fluid can affect noise levels. Some cutting fluids have lower noise generating properties, such as using low noise pumps or fluids with added noise reducers. Conexión por chorro de agua
Maintenance and adjustments: Regular maintenance and adjustments to the Conexión por chorro de agua cutting machine ensure that it works properly and reduces noise. This includes cleaning nozzles, checking and replacing worn parts, and adjusting water flow and pressure.
It should be noted that different noise reduction methods are suitable for different situations, and the specific application requires comprehensive consideration of factors such as the design of the cutting machine, environmental conditions and safety requirements. In practice, it is recommended to refer to the manufacturer’s recommendations and relevant safety regulations to ensure the effectiveness and feasibility of noise reduction methods.
Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.
El siguiente video muestra nuestro nuevo pedido de dos bombas intensificadoras SL-VI (50HP) Chorro de agua de 60000 psi En las pruebas, el embalaje se envía:
