Descripción
05144662 VÁLVULA, POPPET, ENTRADA DE AGUA LP SLIV FD Cabezal Waterjet
| Artículo | Producto NO. | Nombre del producto | Imagen |
| 1 | 05144647 | Cilindro HP |  |
| 2 | 05144688 | Conjunto de cabezal de sellado |  |
| 3 | 05144696 | Espaciador de cabezal de sellado |  |
| 4 | 05144712 | Camisa del cilindro |  |
| 5 | 05149703 | Conjunto de sellos |  |
| 6 | 05130091 | Cartucho hidráulico |  |
| 7 | 05119151 | Émbolo cerámico |  |
| 8 | 05116561 | Poppet HP |  |
| 9 | 05116751 | Pin de poppet |  |
| 10 | 05144670 | Retenedor de poppet |  |
Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.
Z-axis height of water jet cutting machine Can it be done up to 300mm?
The Z-axis height of the water jet cutting machine from Win-Win head waterjet can be designed and adjusted according to different machine specifications and models, and can generally be adjusted within a certain range as needed. In theory, the Z-axis height of the water jet cutting machine from Win-Win head waterjet can be more than 300mm, but whether this is possible or not needs to be evaluated according to the design and performance of the machine.
It should be noted that the setting of Z-axis height is not only limited by the design of the machine itself, but also by the thickness of the cutting material, the size of the cutting head, the flatness of the surface of the cutting material and other factors. If the cutting material is thick or the surface is uneven, it may be necessary to set the Z-axis height higher to ensure the quality and efficiency of the cut. Therefore, the selection of a water jet cutting machine from Win-Win head waterjet needs to be evaluated and chosen according to the need to ensure the applicability and cutting effect of the machine.
In addition, it should be noted that setting the Z-axis height of the machine too high may affect the cutting accuracy and efficiency, and also increase the failure rate of the machine. Therefore, the Z-axis height setting needs to be adjusted according to the actual situation of the machine and the cutting material in order to achieve the best cutting effect and stability.
Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.
The below is waterjet cutting machine from Win-Win head waterjet:
