Bomba de chorro de agua 90K 72165539 cabezal de sellado

Categoría:

Descripción

Sealing Head 72165539 is a important spare part of 90K waterjet pump.

Montaje del intensificador 72170165
Montaje del intensificador 72170165

Artículo

Número de piezaDescripciónCantidadArtículoNúmero de piezaDescripciónCantidad

1

05146592Junta, soporte de Topworks21472162253Desatascador

2

2

20476377Soporte, Topworks21505130091Cartucho de sello hidráulico

2

3

10118206Junta tórica, 1.31×1.56× .1321672175989Brida de retención de buje2

4

05144514Cilindro hidráulico11772158494Conjunto de sello UHP

2

5

05098991Tornillo de cabeza de zócalo, 3/8-16×3-3/481872166738Cilindro UHP

2

6

95688743Arandela de cerradura, .3881972163802Liner

2

7

72101190Conjunto de pistón12020474325Stud, 1-1/8-12×18.31

8

8

10074771Junta tórica, 5.25×5.50× .1322172170157Conjunto de cabezal de sellado

2

9

05120092Anillo de respaldo, 5.25×5.50× .1322272178493Montaje de brida

2

10

72175997Culata hidráulica22320464590Lavadora plana, 1.13

8

11

05097886Tornillo de cabeza de zócalo, 3/4-16×2-1/4122420461761Tuerca hexagonal, 1-1/8-12

8

12

05144183Conjunto del espaciador, interruptor de proximidad22520489339Adaptador, JIC/tubería, 50× .38

1

05144191

Junta tórica, .69× .88× .092672176756Junta tórica, 3.88×4.25× .19

6

13

72141569Kit, interruptor de proximidad2

72134224Interruptor de proximidad

95119012

Tornillo de cabeza de zócalo, 1/4-20×1

90K-Waterjet-Pump-72165539-Sealing-Head
90K-Waterjet-Pump-72165539-Sealing-Head

The sealing head of a waterjet pump is a critical part that helps to maintain the pressure and flow of water through the pump.

The sealing head is located at the top of the waterjet pump and is responsible for sealing the high-pressure water inside the system, preventing leaks and ensuring that the water is directed to the cutting or cleaning tool.

The sealing head typically consists of several components, including the plunger, the seal, and the check valve. The plunger is a piston-like component that moves up and down to create the high-pressure water stream. The seal is a specialized component that is designed to prevent water from escaping through the top of the waterjet pump.

The check valve is designed to govern the flow of water through the system and preventing backflow.

90K-Waterjet-Pump
90K-Waterjet-Pump

It is essential that the sealing head is properly maintained and inspected to make sure that it is functioning correctly. Regular maintenance and inspection can help to stem leaks and other issues that can affect the performance and efficiency of the waterjet pump system.

The frequency of inspection for the sealing head of a waterjet pump depends on several factors, including the intensity of use, the operating conditions, and our manufacturer’s recommendations. However, as a general rule, it is recommended to inspect the sealing head at least once a year or after every 1,000 hours of operation, whichever comes first.

During the inspection, you should check the condition of the plunger, seal, and check valve for any signs of wear or damage. You should also inspect the inlet and outlet fittings, pressure gauge, and relief valve to ensure that they are functioning correctly and not leaking.

If any issues or signs of wear are detected during the inspection, it is recommended to replace the affected components as soon as possible to prevent any further damage or potential safety hazards.

However, the frequency of inspection may vary depending on the specific pump model. Therefore, it is always best to consult our manufacturer’s guidelines or seek advice from a qualified technician to determine the appropriate inspection frequency for your specific waterjet pump.

If you have any questions or want to order the products, please contáctenos.