Descripción
Support, Topworks 20476377 are important components used for 90000psi waterjet cutting that help to ensure reliable and efficient operation of the system.
Artículo | Número de pieza | Descripción | Cantidad | Artículo | Número de pieza | Descripción | Cantidad |
1 | 05146592 | Junta, soporte de Topworks | 2 | 14 | 72162253 | Desatascador | 2 |
2 | 20476377 | Soporte, Topworks | 2 | 15 | 05130091 | Cartucho de sello hidráulico | 2 |
3 | 10118206 | Junta tórica, 1.31×1.56× .13 | 2 | 16 | 72175989 | Brida de retención de buje | 2 |
4 | 05144514 | Cilindro hidráulico | 1 | 17 | 72158494 | Conjunto de sello UHP | 2 |
5 | 05098991 | Tornillo de cabeza de zócalo, 3/8-16×3-3/4 | 8 | 18 | 72166738 | Cilindro UHP | 2 |
6 | 95688743 | Arandela de cerradura, .38 | 8 | 19 | 72163802 | Liner | 2 |
7 | 72101190 | Conjunto de pistón | 1 | 20 | 20474325 | Stud, 1-1/8-12×18.31 | 8 |
8 | 10074771 | Junta tórica, 5.25×5.50× .13 | 2 | 21 | 72170157 | Conjunto de cabezal de sellado | 2 |
9 | 05120092 | Anillo de respaldo, 5.25×5.50× .13 | 2 | 22 | 72178493 | Montaje de brida | 2 |
10 | 72175997 | Culata hidráulica | 2 | 23 | 20464590 | Lavadora plana, 1.13 | 8 |
11 | 05097886 | Tornillo de cabeza de zócalo, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Tuerca hexagonal, 1-1/8-12 | 8 |
12 | 05144183 | Conjunto del espaciador, interruptor de proximidad | 2 | 25 | 20489339 | Adaptador, JIC/tubería, 50× .38 | 1 |
05144191 | Junta tórica, .69× .88× .09 | 26 | 72176756 | Junta tórica, 3.88×4.25× .19 | 6 | ||
13 | 72141569 | Kit, interruptor de proximidad | 2 | ||||
| 72134224 | Interruptor de proximidad | ||||||
95119012 | Tornillo de cabeza de zócalo, 1/4-20×1 |
1. Support
The support is typically made of heavy-duty materials such as steel or aluminum to provide stability and support for the 90000psi waterjet cutting intensifier pump. The design of the support may vary depending on the specific application and operating conditions.
Some supports may be custom-designed to fit the space constraints or other requirements of the application.
2. Topworks
The topworks are the components that sit on top of the 90000psi waterjet cutting intensifier pump and are responsible for generating the high-pressure water flow needed for 90000psi waterjet cutting. The topworks typically consist of a hydraulic cylinder, a plunger, and a seal.
The hydraulic cylinder provides the force needed to move the plunger back and forth within the intensifier, creating the high-pressure water flow.
3. Design considerations
The design of the support and topworks is critical to ensure reliable and efficient operation of the 90000psi waterjet cutting system. The support must be sturdy and robust enough to withstand the high forces and vibrations generated by the 90000psi waterjet cutting pump. The topworks must be designed to provide precise control of the plunger movement to ensure consistent and accurate performance.
4. Replacement frequency
The frequency of support and topworks replacement depends on several factors, including the operating conditions, the type of material being cut, and our manufacturer’s recommendations. In general, these components should be inspected regularly for wear or damage and replaced as needed to ensure safe and reliable operation of the 90000psi waterjet cutting system.
5. Maintenance
Proper maintenance and inspection of the support and topworks are essential to ensure safe and reliable operation of the 90000psi waterjet cutting system. This may include regular inspection of the components for wear or damage, cleaning or flushing the system to remove debris, and following manufacturer’s recommendations for installation and maintenance.
By understanding these important characteristics of the support and topworks used in a 90000psi waterjet cutting intensifier pump, you can take proactive steps to ensure safe and reliable operation of the system. This may include using high-quality components, following manufacturer’s recommendations for installation and maintenance.
Contáctenos para obtener asistencia.
