Descripción
49865873 STEM. VÁLVULA NEUMÁTICA.3/8" 60000 psi chorro de agua
Piezas principales para la bomba SL-IV 50HP:
| Artículo | Producto NO. | Nombre del producto | Imagen |
| 1 | 05144647 | Cilindro HP |  |
| 2 | 05144688 | Conjunto de cabezal de sellado |  |
| 3 | 05144696 | Espaciador de cabezal de sellado |  |
| 4 | 05144712 | Camisa del cilindro |  |
| 5 | 05149703 | Conjunto de sellos |  |
| 6 | 05130091 | Cartucho hidráulico |  |
| 7 | 05119151 | Émbolo cerámico |  |
| 8 | 05116561 | Poppet HP |  |
| 9 | 05116751 | Pin de poppet |  |
| 10 | 05144670 | Retenedor de poppet |  |
Conocimiento para Máquina de corte por chorro de agua y Piezas de repuesto de chorro de agua.
Waterjet cutting machine parts Chorro de agua de 60000 psi with larger or smaller tolerances?
If the tolerance of a water jet cutting machine Chorro de agua de 60000 psi part becomes larger or smaller, it may have an effect on the machine’s performance and cutting results, depending on the specific situation.
Tolerances become larger: When the tolerance of a part becomes larger, it means that the range of allowable dimensional deviations increases. This can lead to the following effects:
Reduced cutting accuracy: Larger tolerances can cause the dimensions of the part to deviate from the design requirements, thus reducing the precision and accuracy of the cut.
Loose connection: If the connection of parts is involved, too large a tolerance may lead to loose or unstable connections, affecting the stability and efficiency of the machine Chorro de agua de 60000 psi.
Shorter life: Excessive tolerances may increase wear and fatigue of the parts, thus reducing the life of the machine.
Smaller tolerances: When the tolerance of a part becomes smaller, it means that the allowable range of dimensional deviations is reduced. This can lead to the following effects:
Increased manufacturing difficulty: Smaller tolerances increase the difficulty and requirements of part manufacturing, placing higher demands on processes and equipment.
Increased cost: Tighter tolerance requirements may require higher quality materials and more precise machining processes, which can lead to increased costs.
Whether tolerances become larger or smaller, the right balance needs to be found by considering design requirements, manufacturing capabilities and machine performance. Tolerances can be controlled within acceptable limits through strict quality control and proper adjustments during the manufacturing process to ensure proper operation and cut quality of the water jet cutting machine Chorro de agua de 60000 psi.
Si está interesado en cualquier producto de chorro de agua de Win-Win Proveedor de chorro de agua, Contáctame por favor.
El siguiente video muestra nuestro nuevo pedido de dos bombas intensificadoras SL-VI (50HP) Chorro de agua de 60000 psi En las pruebas, el embalaje se envía:
