Waterjet cutting machines of waterjet manufacturers: can use several methods for loading and unloading heavy cutting materials:

Hang Cut: Hang cut is a common method of cutting material up and down. In this method, the work material is suspended above the waterjet cutting machine of waterjet manufacturers and then cut by controlling parameters such as the cutting depth of the waterjet. This method is suitable for thinner materials such as sheet metal or plastic.

Reinforced support method: The reinforced support method is an upper and lower heavy cutting method suitable for thicker materials. In this method, the work material is placed on a reinforced support frame, and a waterjet cutting machine cuts from below. Reinforced support frames can provide sufficient support to prevent deformation or deformation of the material. This method is suitable for thicker materials such as concrete, rock, etc.

Inverted cutting method: The inverted cutting method is a method in which the work material is turned upside down and then cut up and down. In this method, the work material is turned over the waterjet cutting machine of waterjet manufacturers and then cut by controlling parameters such as the cutting depth of the waterjet. This method is suitable for situations where it is necessary to cut at the bottom of the work material, such as inclined boards, inclined surfaces, etc.

To sum up, the water jet cutting machine of waterjet manufacturers can use methods such as hanging cutting method, reinforced support method and inverted cutting method to cut materials up and down, and the specific method selection should be determined according to the type, shape and thickness of the working material.