Description
Waterjet cutting parts
Description: high pressure cylinder of waterjet cutting parts
Usage: normally there will be two water jet high pressure cylinders in one water jet intensifier pump
FAQ of the waterjet cutting parts and waterjet cutting machine – When waterjet users encounter some driver alarms during the use of waterjet, do you know how to deal with them?
The method to solve the drive alarm
1. Check the machine temperature: In the process of using the water jet cutting machine, you need to pay attention to check the temperature of the machine. If the machine is overheated, it is recommended to turn off the machine for 5-10 minutes, and continue to use it after the temperature of the machine drops.
2. Reduce the processing load: reduce the load of the machine, adjust the processing process appropriately, reduce the difficulty of processing, and reduce the driving current, which can effectively reduce the probability of driving alarms.
3. Regular maintenance and replacement of electrical components: Before using the water jet cutting machine, it is necessary to regularly check whether the relevant components of the machine are aging. If there is a problem, it needs to be replaced in time to ensure the reliability of the machine operation.
4. Correct operation: When using a waterjet cutting machine, it is necessary to understand and use relevant technical parameters correctly, such as voltage, current, etc., to avoid problems with the drive circuit caused by misoperation
How to stop the servo motor when an alarm occurs
Cancellation of the alarm
Common alarms and solutions
5: The way to stop the servo motor when alarming
For the alarms and warnings described as SD in the stop method, stop with the dynamic brake after forced stop deceleration.
For the alarms and warnings described as DB or EDB in the stop method, the dynamic brake is used to stop without forced stop deceleration.
You can check the stop mode of each alarm in the list of alarms in the manual. For example, the following picture:
6: Cancellation of the alarm
After eliminating the cause of the alarm, the alarm can be canceled by any method with ○ in the alarm cancel column. After eliminating the cause of the warning, the warning is automatically dismissed.
Alarm cancellation is performed by alarm reset, CPU reset, or turning on the power again.
For example, alarm 10 can be canceled by alarm reset, CPU reset or power on again
If you happen to encounter unsolvable waterjet cutting machine problems, you can leave us a message, and we will arrange professional technicians to serve you
Win-Win provide all brands of waterjet cutting parts and also the intensifier pump and cutting machine, if you need it, do not hesitate to contact us, we will update some tips of how to replace the waterjet cutting parts and maintenance of the waterjet machine here
