Parts for Water Pumps 10146082 O-Ring, 1.69 X 1.88 X .09

Category:

Description

Parts for Water Pumps: O-Ring, 1.69 X 1.88 X .09 10146082

The O-ring, 1.69 X 1.88 X .09 is a specific size of O-ring that is commonly used in high-pressure waterjet pumps, including those that operate at 90,000 psi.

O-rings are a type of mechanical seal that is used to prevent leaks and maintain pressure in hydraulic systems, including those found in waterjet pumps.

Intensifier Assembly 72170165Intensifier Assembly 72170165

Item

Part NumberDescriptionQuantityItemPart NumberDescriptionQuantity

1

05146592Gasket, Topworks Support21472162253Plunger

2

2

20476377Support, Topworks21505130091Hydraulic Seal Cartridge

2

3

10118206O-Ring, 1.31×1.56× .1321672175989Bushing Retainer Flange2

4

05144514Hydraulic Cylinder11772158494UHP Seal Assembly

2

5

05098991Socket Head Screw, 3/8-16×3-3/481872166738UHP Cylinder

2

6

95688743Lock Washer, .3881972163802Liner

2

7

72101190Piston Assembly12020474325Stud, 1-1/8-12×18.31

8

8

10074771O-Ring, 5.25×5.50× .1322172170157Sealing Head Assembly

2

9

05120092Backup Ring, 5.25×5.50× .1322272178493Flange Assembly

2

10

72175997Hydraulic Cylinder Head22320464590Flat Washer, 1.13

8

11

05097886Socket Head Screw, 3/4-16×2-1/4122420461761Hex Nut, 1-1/8-12

8

12

05144183Spacer Assembly, Proximity Switch22520489339Adapter, JIC/Pipe, 50× .38

1

05144191

O-Ring, .69× .88× .092672176756O-Ring, 3.88×4.25× .19

6

13

72141569Kit, Proximity Switch2

72134224Proximity Switch

95119012

Socket Head Screw, 1/4-20×1

Parts for Water Pumps 10146082 O-Ring, 1.69-x-1.88-x-.09
Parts for Water Pumps 10146082 O-Ring, 1.69 X 1.88 X .09

Here are some general characteristics of the O-ring, 1.69 X 1.88 X .09 used in 90,000 psi waterjet pumps:

1. Material composition

O-rings used in high-pressure waterjet pumps are typically made from synthetic rubber materials that can withstand the high pressures and temperatures of the pump.

Common materials include nitrile rubber, EPDM, and Viton.

2. Size and dimensions

The O-ring, 1.69 X 1.88 X .09 has a specific size and dimension, with an inner diameter of 1.69 inches, an outer diameter of 1.88 inches, and a thickness of 0.09 inches.

This size is designed to fit specific components of the waterjet pump, such as the manifold or cylinder.

3. Pressure rating

O-rings used in 90,000 psi waterjet pumps need to be able to withstand the high pressure of the water and hydraulic fluid in the pump.

The pressure rating of an O-ring refers to the maximum pressure it can withstand without leaking or failing.

4. Temperature range

O-rings used in high-pressure waterjet pumps also need to be able to withstand a wide range of temperatures, including both high and low temperatures.

The temperature range of an O-ring refers to the range of temperatures it can withstand without degrading or losing its sealing properties.

5. Chemical resistance

O-rings used in 90,000 psi waterjet pumps may also need to resist exposure to various chemicals or fluids, such as hydraulic oil or water.

The chemical resistance of an O-ring refers to its ability to resist degradation or damage from exposure to specific chemicals or fluids.

6. Installation and removal

O-rings used in 90,000 psi waterjet pumps should be installed and removed using proper techniques and tools to prevent damage or distortion.

It’s important to follow the manufacturer’s recommended installation and removal procedures to ensure optimal performance and prevent leaks or other issues.

7. Storage and handling

O-rings used in 90,000 psi waterjet pumps should be stored and handled carefully to prevent damage or contamination.

It’s important to store O-rings in a cool, dry place away from direct sunlight and exposure to chemicals or other substances.

8. Compatibility

O-rings should be compatible with the specific fluids or chemicals used in the pump, as well as with the materials of the pump components.

90k-psi-Parts
Parts for Water Pumps – 90K

Contact us for assistance.