Description
Water Jet Parts: Stud, 1-18-12 X 18.31 20474325
Application: 90,000 psi waterjet intensifier pump
Intensifier Assembly 72170165
Item | Part Number | Description | Quantity | Item | Part Number | Description | Quantity |
1 | 05146592 | Gasket, Topworks Support | 2 | 14 | 72162253 | Plunger | 2 |
2 | 20476377 | Support, Topworks | 2 | 15 | 05130091 | Hydraulic Seal Cartridge | 2 |
3 | 10118206 | O-Ring, 1.31×1.56× .13 | 2 | 16 | 72175989 | Bushing Retainer Flange | 2 |
4 | 05144514 | Hydraulic Cylinder | 1 | 17 | 72158494 | UHP Seal Assembly | 2 |
5 | 05098991 | Socket Head Screw, 3/8-16×3-3/4 | 8 | 18 | 72166738 | UHP Cylinder | 2 |
6 | 95688743 | Lock Washer, .38 | 8 | 19 | 72163802 | Liner | 2 |
7 | 72101190 | Piston Assembly | 1 | 20 | 20474325 | Stud, 1-1/8-12×18.31 | 8 |
8 | 10074771 | O-Ring, 5.25×5.50× .13 | 2 | 21 | 72170157 | Sealing Head Assembly | 2 |
9 | 05120092 | Backup Ring, 5.25×5.50× .13 | 2 | 22 | 72178493 | Flange Assembly | 2 |
10 | 72175997 | Hydraulic Cylinder Head | 2 | 23 | 20464590 | Flat Washer, 1.13 | 8 |
11 | 05097886 | Socket Head Screw, 3/4-16×2-1/4 | 12 | 24 | 20461761 | Hex Nut, 1-1/8-12 | 8 |
12 | 05144183 | Spacer Assembly, Proximity Switch | 2 | 25 | 20489339 | Adapter, JIC/Pipe, 50× .38 | 1 |
05144191 | O-Ring, .69× .88× .09 | 26 | 72176756 | O-Ring, 3.88×4.25× .19 | 6 | ||
13 | 72141569 | Kit, Proximity Switch | 2 | ||||
| 72134224 | Proximity Switch | ||||||
95119012 | Socket Head Screw, 1/4-20×1 |
The studs used for a 90,000 psi waterjet intensifier pump are typically high-strength fasteners that are designed to withstand the extreme pressures and vibrations of the pump.
These studs are used to secure various water jet parts of the pump, such as the manifold, the cylinder, and the waterjet nozzle.
Here are some general characteristics of the studs used for a 90,000 psi waterjet intensifier pump:
1. High strength
The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically made from high-strength materials, such as hardened steel or titanium, to help withstand the extreme pressures and vibrations of the pump.
2. Class rating
The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically rated according to their strength and durability, with higher class ratings indicating greater strength and durability.
3. Thread type
The studs used for water jet parts of a 90,000 psi waterjet intensifier pump typically have a specific thread type, such as UNC or UNF, to ensure proper fit and alignment with other components of the pump.
4. Length and diameter
The length and diameter of the studs used for water jet parts of a 90,000 psi waterjet intensifier pump can vary depending on the specific application and requirements of the pump.
5. Thread pitch
The studs used for water jet parts of a 90,000 psi waterjet intensifier pump typically have a specific thread pitch, which is the distance between each thread.
The thread pitch is important for ensuring proper fit and alignment with other components of the pump.
6. Torque specifications
The studs used for water jet parts of a 90,000 psi waterjet intensifier pump are typically installed to a specific torque specification, which is the amount of force required to tighten the stud to the proper level.
Proper torque is important for ensuring that the stud is securely fastened and can withstand the extreme pressures of the pump.
7. Coating
Some studs may be coated with a protective substance, such as a corrosion-resistant coating or a lubricant, to help protect against wear and tear and to facilitate easier installation and removal.
Contact us for assistance.
