WJ070025/593 Collimation Tube Nozzle Body Water Jet Head

Category:

Description

Water jet head spare parts collimation tube nozzle body

Item number: WJ070025/593

FAQ of the waterjet cutting pump and the water jet head:

What is the accuracy of water jet cutting machine?

The accuracy of water jet cutting machine can reach ±0.1mm. If AC five-axis water jet head is used, the accuracy can be improved, and the cutting slope can be eliminated at the same time
2: How thick can a water jet machine cut?
Waterjet cutting can cut materials of different thicknesses, depending on the pressure of the waterjet intensifier pump equipped, the conventional 60k waterjet pump can cut 180mm thick metal, and the ultra-high pressure 90k intensifier pump can cut 300mm thick metal, normally to cut the metal, the 3 axis water jet head can meet the waterjet user’s cutting requirement
3: How to choose the abrasives for water jet cutting?
The commonly used water jet cutting sand is abrasive garnet, the color is reddish brown, it depends on the composition of the sand, whether the edges and corners of the particles are sharp, and do not mix the sand with impurities. The sand cannot be recycled, and bad manufacturers are strictly prohibited from using it The sand is mixed into the new sand for sale, and customers are expected to distinguish carefully, the use of bad sand will affect the cutting speed and efficiency
4: What should be paid attention to when using water jet cutting equipment?
Pressure adjustment, many customers want to improve the efficiency, adjust the water jet cutting pressure to a high level, this is to meet the temporary efficiency, but the wear and tear on the equipment is also very fast, relatively speaking, it needs comprehensive labor costs, maintenance costs, electricity costs, sand Comprehensive calculation of cost
5: How long can the cutting grate of the waterjet cutting table be used?
If the same figure is not cut at the same position, the cutting grate of the waterjet workbench can be used for hundreds of hours without any problem, so this requires customers to pay attention when cutting the product. If it is mass production, please do not use it in one position for too long