Waterjet Spare Parts 013932-1 Cylinder HP 55 KSI

Category:

Description

Waterjet Spare Parts Cylinder HP 55 KSI 013932-1 Water Jet Cutter

Questions and answers about waterjet cutting machines and Waterjet spare parts from waterjet cutting users.

Q1, What are apprx cutting speed (320Mpa, 0.3 orifice/ 0.42 orifice) for plastics like acetal (pom) and polyethylene? And for weather proof plywood? Thicknesses for example 5mm, 10mm, 15mm, 20mm and 30 mm?

A1, The maximum orifice aperture available for the basic pump is 0.33mm. 320mpa: 0.33mm orifice(mm/min)

5mm: 150-200,

10mm: 130-180,

15mm: 120-170,

20mm: 110-160,

30mm: 90-140.

1.1 What materials can the water jet cutting machine cut?

Water jet cutting machines can cut many kinds of materials, such as metal, glass (not including tempered glass), tiles, marble, stone, plastic, rubber, composite materials, etc., because of the unique properties of water jet cutting machines, they are very popular Loved by the majority of users, it belongs to cold cutting, which will not cause thermal damage and deformation to the material, and will not produce dust and harmful smoke. It is a very environmentally friendly cutting method.

1.2 What is the thickness of the material that Waterjet cutting machine can cut?

Generally speaking, the thickness of materials that can be cut by Waterjet cutting machine ranges from 1-300mm. Different equipment configurations can be selected for cutting different thicknesses. You can consult us about these, and we will recommend the most suitable machine for you.

1.3 What is the maximum hole diameter of the matched waterjet spare parts orifice in the waterjet cutting head?

Win-Win has different intensifier pump types:

Such as WW5060JET and JET50 intensifier pumps, the largest waterjet spare parts orifice they can drive has a diameter of 0.33mm;

The largest waterjet spare parts orifice that the WW60JET intensifier pump can drive is 0.35mm in diameter;

Screamline SL-VI (100HP) can drive waterjet spare parts orifice with a maximum aperture of 0.42mm.

It depends on the flow rate of the machine. The larger the flow rate, the larger the hole diameter of the waterjet spare parts orifice that can be supported, the larger the sand output, and the higher the cutting efficiency.

1.4 What is the cutting speed of the water jet cutting machine?

The main determinant of the cutting speed of the water jet cutting machine is the working pressure that the equipment can achieve. The higher the pressure, the higher the cutting speed and efficiency, but the higher the pressure, the higher the cost of the intensifier pump. Win-Win currently has 60kpsi and 90kpsi intensifier pumps, which can meet the needs of different users for cutting efficiency. Generally speaking, it is necessary to cut thick metals of 100-300mm, such as iron, stainless steel, copper, aluminum, titanium-aluminum alloy, carbon steel, etc. Users can choose a 90kpsi intensifier pump, and its cutting efficiency is 40-50% higher than that of a 60kpsi intensifier pump.

If you want to buy waterjet cutting machine, welcome to consult us, we can customize efficient and very cost-effective solutions for you.